Masonry walls, concrete tiles, fibro roofs, metal roofs – flat or pitched, metal tiles, fibre cement sheeting, masonry or fibre cement shingles and most masonry surfaces when suitably primed.
Apply Solacoat Heat Reflective Waterproof Roof Membrane at a minimum rate of 5.0 m2/ litre per coat for a two coat application as the preferred application. Allow minimum 24 hours drying time between coats. Alternatively, if a satisfactory period of fine weather is forecasted then one (1) coat of Solacoat Heat Reflective Waterproof Roof Membrane can be applied at a spreading rate of 2.5 – 3 square metres per litre. This will provide a dry film thickness of 170 microns.
If waterproofing were required, application of a third coat at 5.0 m2/ litre would be necessary.
For airless spray application, a pump unit of at least 32:1 power must be used with a 22 – 26 thou tip.
Drying time is approximately 24 hours at 25°C when applied at the recommended rate.
Drying Times may be extended by adverse drying conditions or very high film build.
For complete product specifications and MSDS please get in touch.